Kreg Pocket-Hole Jig 320 Review
Building something out of wood is a lot easier when you have a good way to join the pieces together. The Kreg Pocket-Hole Jig 320 helps with that by guiding your drill to create angled holes for screws.
I’d consider this for anyone who likes tackling projects around the house, especially building shelves, storage cabinets, or simple furniture. It’s a handy accessory to have when you want to build something yourself instead of buying it.
Features
- Designed for creating pocket holes in woodworking projects
- Two-hole drill guide for common pocket-hole applications
- Adjustable guides for different workpiece widths
- Portable design for use at a workbench or on location
- Clamp-compatible design to help secure the jig during use
- Intended for furniture, cabinets, shelving, and general DIY woodworking
- Requires a compatible drill bit and pocket-hole screws for the intended application
- Designed for use with wood thicknesses within the manufacturer’s specified range
Common Questions
The Kreg Pocket-Hole Jig 320 is used to drill angled holes into wood so you can join two pieces together with screws. It’s useful for projects such as shelves, cabinets, furniture, and simple woodworking builds. The jig guides the drill bit to help create consistent pocket holes.
Yes. The jig can be used for many furniture and shelving projects, including bookcases, storage units, cabinets, and workbench accessories. The finished joint will depend on the wood, screw selection, and project design, so make sure the connection is suitable for the weight and intended use.
The Kreg Pocket-Hole Jig 320 is designed for material thicknesses from 1/2 inch to 1 1/2 inches. Setting the jig and drill bit correctly for the thickness of the wood is important for creating properly positioned pocket holes.
Yes. Pocket-hole joinery requires a compatible stepped drill bit designed to create the pocket and pilot hole. Check which accessories are included with the specific kit before purchasing, because package contents can vary.
The jig can be used with a suitable clamp to hold it securely against the workpiece while drilling. A compatible Kreg clamp can make setup more convenient, but you should always secure the jig and wood properly before operating the drill.
Check the package contents for the particular kit you’re buying. Pocket-hole screws are required to assemble the joint, but you should not assume every package includes a full assortment. Use the correct screw length and type for the material and application.
Yes. The Kreg Pocket-Hole Jig 320 is designed to make pocket-hole joinery more approachable for DIYers. Beginners should practice on scrap wood first, follow the setup instructions, and check their measurements before working on the final project.
Is It Worth Considering?
A pocket-hole jig can be useful if you plan to build more than one woodworking project. Rather than trying to position every screw by eye, the jig helps guide the drilling process and makes it easier to create consistent joints.
It is not necessary for every woodworking job, and the right joint still depends on the materials, design, and loads involved. Before buying, check the included accessories and the manufacturer’s instructions to make sure the kit suits your projects.
Check out the Kreg Pocket-Hole Jig 320 at Lowe’s
Affiliate disclosure: Epic Tool Reviews may earn a commission from qualifying purchases made through links on this page, at no additional cost to you.
